FIRE-LITE W-H355R HENRIQUE

FIRE-LITE W-H355R HENRIQUEProduct Overview W H355 and W H355R addressable, wireless heat detectors use a state of the art thermistor sensing circuit for a fast response. The W H355 and W H355R provide fixed temperature alarm detection at 135F. The W H355R also provides Rate of Rise Detection at 15F min. The W H355 and W H355R communicate with the fire alarm control panel (FACP) through a wireless mesh network to the W GATE wireless gateway. Note: Must be used with an ES 200X,

The FSRRM24 provides five Form C relays that you can configure as common relays

or from DC power

The results of the self-check are automatically updated and permanently stored in the detector’s non-volatile memory

from 32°F to 150°F

These panels also support Class B (Style 4) and Class A (Style 6) configuration for SLC

Ionization Smoke Detector

dual listed for wall and ceiling mounting

positioned at the last contact of the circuit (for normally open contacts)

this pull station requires two-step activation to help prevent accidental alarms while ensuring quick and efficient response during fire emergencies

and a cover tamper feature initiates a trouble signal for a removed or improperly installed sensor cover

2 mm (18 gauge) cold-rolled steel enclosure houses a variety of control panels by Bosch

As the only watertight duct smoke detector on the market