Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking Ingestion-build-221493 0 %(V/V) or from 24

0 %(V/V) or from 24

The test report includes the information that consists of a reference to BS 7020-7

minimum design coefficient and calculation method are based on the resistance to internal pressure with water at 20 °C for 50 years

this part of ISO 11042 requires that the following parameters be continuously monitored: emissions

that are designed for use with a variety of flexible and semi-rigid coaxial cables and rigid coaxial lines

Carbonaceous materials used in the production of aluminium. Cold and tepid ramming pastes. Preparation of baked test pieces and determination of loss on baking Ingestion-build-221493 0 %(V/V) or from 241 Scope This International Standard describes a method of baking green test specimens made by compacting carbonaceous ramming pastes. It includes the baking procedure (heating rate and holding time) and the determination of the loss on baking (relative mass loss). Baked test specimens of ramming paste need to be prepared for the determination of properties after baking, for instance apparent density, crushing strength and porosity.