16.5 mm I.D. Dry Pellet Pressing Die - EQ-Die-16D-B Battery R&D

16.5 mm I.D. Dry Pellet Pressing Die - EQ-Die-16D-B Battery R&DEQ Die 16D B is a 16. 5mm I. D. pressing die set for making 16. 5 mm diameter sample pellets. The pressing die is made of high stretched and highly polished carbon steel to achieve high hardness to meet the essential requirements of making ceramic or metal samples. ( Modified structure from April 10 for quicker release ) SPECIFICATIONS: Model Number EQ Die 16D B Maximum Load 16 metric Ton (at room temperature) 910 MPa Material HRC 60 62 hardened steel

The four sides of wipe cloth is cut by the laser

and 1/8 NPS valve with installed Mechanical Pressure Gauge

Compliance CE Approved

One oil-less vacuum pump is included in the standard package

The compact flowmeters are ideal for MTI oven KSL-1700X-H2

A vacuum port is available on the top side for better electrolyte injection under vacuum

You may add a 50Kg load cell kit to measure pressure digitally

typically:

Stacking sequence:  ABCB  (4H)

ITO film=100nm

and weather exposure while increasing temperature range to +300°F

Polish:          One side  EPI polished by CMP tecnology with less sub-surface lattice damage