Ag/AgCl Reference Electrode Filling Solution - 50 mL Ga The electrospinning process should be

The electrospinning process should be confined in an enclosed chamber

Surface Polishing:             one side epi polished

No Electric part inside for safe operation

photolytic water splitting

each equipped with an electrolyte inlet and outlet

Ag/AgCl Reference Electrode Filling Solution - 50 mL Ga The electrospinning process should beThis is a filling solution of 3M KCl for aqueous Ag AgCl (refillable) reference electrodes. Other volumes are available on request. Application note The solution is placed in the electrode through septa using a syringe with needle and the second needle serving as the air outlet. Minimum needle length is 25 mm. Maximum needle outer diameter is 0. 6 mm. Syringes and needles are included in the product. Specification solution: 3M KCl volume: 50 mL Safety