SP10, SP12, SP18 Drill bit Masonry Size:SP10 - 7/8" x 8" While bit life varies with

While bit life varies with the surface of the asphalt and the gravel under it

The anchor requires a 7/8" hole 12" deep and the use of a grout such as our EPX2 or EPX3

Use stainless for high corrosion resistance or salty environments

Use with an SDS+ drive rotary hammer

so that attached devices can be removed without leaving dangerous screws or protrusions on the walkway

SP10, SP12, SP18 Drill bit Masonry Size:SP10 - 7/8" x 8" While bit life varies withThis drill bit is suitable for installing most of our asphalt anchors. The shank is SDS+ compatible. SDS+ shank drill bits have two deep slots and two shallow slots on the shank for additional hold in your rotary hammer. Shank diameter is 0. 393". Use with an SDS+ drive rotary hammer. The bit has carbide tips for long life. Carbide is preferred over diamond tips as the hole they dril in asphalt is rougher, promoting improved adhesion between the