0.2 mm Thick Nickel Foam for Battery Cathode Substrate or Solid-State Electrolyte Support (L 1000 x W 200 mm) - EQ-bcnf-02m GaP

0.2 mm Thick Nickel Foam for Battery Cathode Substrate or Solid-State Electrolyte Support (L 1000 x W 200 mm) - EQ-bcnf-02m GaPNickel Foam for Battery Cathode Substrate (1000mm length x 200mm width x 0. 2 mm thickness) EQ bcnf 02m Specifications Material: Nickel Foam, (excellent anti corrosive) Purity: > 99. 9 wt % Impurity: C? 200S? 80Fe? 100Cu? 100Si? 50 ( ppm) Surface Density: 346 g m^2 Length: 1 meter Width: 200mm Thickness: 0. 2 mm Net weight: 104g Porosity: ? 95% (80 110 Pores per Inch. average hole diameters about 0. 25mm) Extensibility: Lengthwise? 5%; Widthwise? 12%

Carrier Concentration:        (0

• Non-effective Area: 2

The bottom cylinder (piston) is shown in the illustration in the dimension section

This product is sensitive to water and should be sealed and stored in a cool and dry place to avoid explosion

Vacuum port fitting (Default)

Package Content: 1 x Internal Bent Circlip Plier

Knife with special silicon coating in cutting die is available upon request to cut Li metal foil

storage in this compartment prevents loss or misplacement of the rotor

175 mm Thickness

Crystal:          Monopotassium Phosphate

The lithium chips were packed in the dry room with < 2%RH

This is the right side of the smart sealing assembly for 2" vacuum tube furnace to seal one end of OD 50-52 mm (2")  tube without any welding and gluing