Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm. Accessory mounting dimensions best-seller The recommendations are applicable to

The recommendations are applicable to loadbearing wall and partition constructions where actual stud sizes are not less than 62mm x 37mm (depth x breadth) and to non-loadbearing wall and partition constructions where the actual stud sizes are not less than 48mm x 37mm (depth x breadth)

machine guards and barriers or holes

mathematics

The conformance tests will not test the DTE performance characteristics

250 mm× 110 mm and 300 mm× 135 mm

Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm. Accessory mounting dimensions best-seller The recommendations are applicable to1 Scope This International Standard specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020 3. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020 3, but this does not limit their application. This International Standard covers the following accessories: AP2 rod clevis, female thread (see Figure 1 and Table