Bambu Lab PLA Matte Refill 1.75mm - 1kg (Various Colors) Color:Lemon Yellow (11400)

Bambu Lab PLA Matte Refill 1.75mm - 1kg (Various Colors) Color:Lemon Yellow (11400)BULK SALE PRICE RFID for Intelligent Printing All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps. Recommended Printing Settings Drying Settings (Blast Drying Oven) 55 C8 h Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant) Nozzle Temperature 190 230 C Bed Temperature (with PVP Glue) 35 45 C Printing Speed < 300 mm Physical

This all-new material material is ideal for anyone that desires a structural component with high heat

- If your printer is not already using PT100 sensing then an amplifier board will be required to use the PT100 variants

Like upgrading the engine in your car

the maximum water soaking temperature should not exceed 50°C to prevent deformation of the main model

Input Diameter: 1

Engineering Plate

Built-In Safety Features: The Polysher™ was designed with smart electronics

2/10 IZOD Impact Strength(kJ/㎡) 33

4 + tube length x 0

which provides fantastic flow response and keep the exact same geometry and compatibility as the rest of the E3D ecosystem

Easy on the eyes formula – high in opaqueness and a matte finish

4 ± 3 (kJ/m²)